Table of Contents
Advertisement
DWR-980 Wireless AC1200 4G LTE Router
with VDSL2 Support, Gigabit Ethernet Ports,
2 FXS Ports, and USB Port
User Manual
Parameter
Enable Call Waiting
Disable Call Waiting
Enable Do Not Disturb
Disable Do Not Disturb
Enable Unconditional Forwarding Enables forwarding for all calls.
Disable Unconditional Forwarding Disables forwarding for all calls.
Enable Call Forwarding On Busy
Disable Call Forwarding On Busy Disables call forwarding when this line is busy.
Enable Call Forwarding No
Answer
Disable Call Forwarding No
Answer
Enable Hot Line
Disable Hot Line
Local Call
Call by IP
Redial
To use the call forwarding function on the connected phone, dial the corresponding prefix, wait to
hear the signal for number dialing in the receiver, and dial the number for forwarding on the phone.
You can also configure call forwarding in the List of SIP Lines section on the Profile Name /
Basic Settings page.
Description
Enables the call waiting function.
Disables the call waiting function.
Enables rejection of all incoming calls (the busy tone
will be heard).
Disables rejection of incoming calls.
Enables call forwarding when this line is busy.
Enables call forwarding when this line gives no reply.
Disables call forwarding when this line gives no reply.
Enables the hotline.
Disables the hotline.
Makes a call to the neighboring line. In the Additional
parameter field, specify the number of the FXS port
for calling.
Makes an outgoing call. In the Additional parameter
field, specify a part of the IP address for calling, for
example, 192.168.100. The remaining part of the IP
address is dialed on the connected phone. Use the
star (*) key to dial the dot (.) character.
Enables number redial.
Page 306 of 372
Configuring via Web-based Interface
Advertisement
Table of Contents
