Table of Contents
Advertisement
DWR-980 Wireless AC1200 4G LTE Router
with VDSL2 Support, Gigabit Ethernet Ports,
2 FXS Ports, and USB Port
User Manual
USB Modem
The pages of the USB Modem / Modem 1 section are designed to operate the built-in LTE
modem. The pages of the USB Modem / Modem name section are designed to operate an
external USB modem connected to the router.
!
Some models of USB modems do not allow performing operations available in this menu
section through the web-based interface of the router.
If the PIN code check for the SIM card inserted into the modem is not disabled, the relevant
notification will be displayed in the top right corner of the page.
Click the ENTER PIN button and enter the PIN code in the PIN input window. Click the Show
icon (
) to display the entered code. Then click the APPLY button.
Some USB modems in the router mode and Android smartphones in the modem mode have an IP
address from the subnet which coincides with the router's local subnet. In this case, the router's
web-based interface can be unavailable. For correct operation, disconnect the device from the USB
port and reboot the router. Then access the web-based interface, go to the Connections Setup /
LAN page, and change the value of the IP address field on the IPv4 tab (for example, specify the
value 192.168.2.1). Wait until the router is rebooted.
Figure 170. The notification on the PIN code check.
Figure 171. The window for entering the PIN code.
Page 233 of 372
Configuring via Web-based Interface
Advertisement
Table of Contents
