Start With D-Link Dsl-2750E - D-Link DSL-2750E User Manual

Indicator Color
USB Green
DSL Green
Internet Green
Red

Start With D-LINK DSL-2750E

Splitter
Using Splitter can reduce disturbance signals in the telephone line. D-Link DSL-
2750E needs to use a separate splitter. The External has three ports.
LINE: Connecting to the phone jack.
PHONE: Connecting to the telephone sets.
DSL: Connecting to the D-Link DSL-2750E.
Remark: Figure 1-4 Computer to D-Link DSL-2750E Page 9
Status
On The connection of USB flash disk has been
established.
Blinking Data is being transmitted.
Off The connection of USB flash disk is not established.
On On Initial self-test of the unit has passed and is ready
Blinks The device is detecting itself.
Off Initial self-test is failed.
Off The device is under the Bridge mode, DSL connection
is not present.
Blinks Internet data is being transmitted in the routing mode.
On The IP is connected.
On
The device is attempted to become IP connected, but
failed.
7
Description