Usb Modem; Information - D-Link DSL-2750U User Manual

DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual

USB Modem

This menu is designed to operate USB modems.
If the PIN code check for the SIM card inserted into your USB modem is not disabled, then upon
the first access to the pages of the USB modem menu (under the current web-interface session)
the page for checking the PIN code is displayed
the Enter button.

Information

On the USB modem / Information page, you can view data on the USB modem connected to the
router.
When a USB modem is connected to the router, the following data are displayed on the page:
Parameter
Vendor
Model
Revision
IMSI
IMEI
Signal level
Operator name
Mode
8 For GSM USB modems only. For CDMA USB modems, it is required to disable the PIN code check on the
identification card prior to connecting the USB modem to the router.
Figure 102. The USB modem / Information page.
The manufacturer of your USB modem.
The alphanumeric code of the model of your USB modem.
The revision of the firmware of your USB modem.
The code stored in the SIM card inserted to your USB modem.
The code stored in the memory of the USB modem.
The signal level at the input of the modem's receiver. The zero signal
level shows that you are out of the coverage area of the selected
operator's network.
When the needed network is available, the name of the operator is
displayed in this field.
A type of the network to which the USB modem is connected (2G or 3G).
Page 115 of 138
8 . Enter the PIN code in the relevant field and click
Description
Configuring via Web-based Interface