Usb Modem - D-Link DSL-G2452GR User Manual

Section 4 - Configuration
On this page, you can check and edit the router's configuration for the USB modem (if one
is inserted).
If the PIN code check for the SIM card inserted into your USB modem is enabled, the relevant
notification will be displayed in the top right corner of the page.
To activate the USB modem, click the ENTER button. When the USB Modem / PIN page
opens, enter the PIN code in the Authorization section. Click the Show icon to display the
entered code. Then click the APPLY button.
Some USB modems in the router mode and Android smartphones in the modem mode
may have an IP address from the subnet which coincides with the router's local subnet. In
this case, the router's web-based interface may be unavailable. If this occurs, disconnect
the device from the USB port and reboot the router. Then access the web-based interface,
go to the Connections Setup / LAN page, and change the value of the IP address field on
the IPv4 tab (for example, specify the value 192.168.2.1).
D-Link DSL-G2452GR User Manual

USB Modem

59