A+ Workstation AS -5014A-TT User's Manual
3.2 Accessing the System
Caution: Except for short periods of time, do not operate the system without the cover in
place. The chassis cover must be in place to allow proper airflow and prevent overheating.
Left Side and Right Side Covers
Removing the Left Side Chassis Cover
Begin by powering down the system.
1. Using a screwdriver, remove the two screws at the rear of the chassis.
2. Push the release button located at the top rear of the chassis as shown below.
3. Lift the cover up to remove it from the chassis.
2
1
3
1
Figure 3-1. Removing the Left Side Cover
22