Supermicro AS -5014A-TT User Manual page 48

A+ Workstation AS -5014A-TT User's Manual
Replacing Front Fans
1. Open the front bezel to access the front fan area.
2. Disconnect the fan wiring.
3. If existing fans are mounted with rubber pins, pull the fans toward you. If the fans are
mounted by screws, unscrew the fans.
4. Install new fans with rubber pins or screws.
Note: The chassis includes rubber mounting stands for these fans. Place the rubber mount in
the fan mounting holes, and then align it to the proper holes in the front panel. Once aligned,
pull the rubber mount to secure it in place.
Figure 3-22. Installing the Front Fans
48