Supermicro AS -5014A-TT User Manual page 64

A+ Workstation AS -5014A-TT User's Manual
HD Audio Enable/Disable
JPAC1 enables or disables Audio Controlleron the motherboard. See the table below for
jumper settings. The default setting is Enabled
LAN1/LAN2 Enable/Disable
Use JPL1 and JPL2 to enable or disable LAN ports 1 and 2 respectively on the motherboard.
Refer to the table below for jumper settings. The default setting is Enabled.
USB6/7 Wake Up
Use the jumper JPUSB1 to "wake-up"your system by pressing a key on a USB keyboard
or clicking the USB mouse connected to the backpanel USB ports 6/7. JPUSB1 is used to-
gether with a USB Wake-Up feature in the BIOS. Enable this jumper and the USB support
in the BIOS to wake upyour system via USB devices.
HD Audio Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
LAN1/LAN2 Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Reset (Default)
Pins 2-3 Disabled
JPUSB1
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
64