Gpus - Supermicro AS -5014A-TT User Manual

A+ Workstation AS -5014A-TT User's Manual

GPUs

Installing a GPU with Bracket and Holder
1. Align the screw holes of the GPU with the bracket by standing the gold finger on the
surface.
2. Tighten two screws to secure the GPU to the bracket.
3. Bend and break the end of the bracket before plugging the GPU into the system, as
shown below.
Figure 3-14. Breaking Off the End of the Bracket
4. Remove the PCIe bracket on the chassis.
5. Install the GPU to the motherboard.
6. Align the bracket to the GPU holder and secure it with a screw.
Figure 3-13. Securing the GPU to the Bracket
42