Table of Contents
Advertisement
Connector
Description
JTPM1
Trusted Platform Module (TPM)/Port 80 Header
JSPDIF In/JSPDIF Out
SPDIF (Sony/Philips Digital Interface) In/Out Headers
USB0/1
USB 2.0 Front Panel Header
USB10/11
USB 3.2 (Gen 1) Type A Front Panel Header
USB9
USB 3.2 (Gen 2) Type C Front Panel Header
VGA
VGA Port
Note:
•
Jumpers in the table not described are for manufacturing testing purposes only and are
not covered in this manual.
Caution: The equipment should only be operated by skilled or instructed persons.
Instructed person is a term applied to a person who has been instructed and trained
by a skilled person, or who is supervised by a skilled person.
Caution: It is recommended that you connect both 8-pin (JPW3) and 24-pin (JPW1)
connectors to your power supply modules before powering on the motherboard.
Caution: For installing multiple GPU cards, it is required to connect both 8-pin
connectors (JPW2 and JPW4). See Chapter 4 Power Connection for more details.
17
Chapter 1: Introduction
Advertisement
Table of Contents
