Supermicro AS -5014A-TT User Manual page 84

A+ Workstation AS -5014A-TT User's Manual
Chipselect Interleaving
This setting controls interleave memory blocks across the DRAM chip for node 0. The
options are Disabled and Auto.
BankGroupSwap
This setting controls the Bank Group Swap. The options are Enabled, Disabled and Auto.
DRAM Scrub Time
This setting provides a value that is the number of hours to scrub memory. The options are
Disabled, 1 hour, 4 hours, 8 hours, 16 hours, 24 hours, 48 hours and Auto.
CPU1 Memory Configuration
These sections are for informational purposes. They will display some details about the
detected memory according to each CPU on the motherboard, such as:
•
Detected Size (per slot, in MB)
•
Current Speed (MT/s)
PCIe/PCI/PnP Configuration
This menu provides PCIe/PCI/PnP configuration settings and information.
PCI Bus Driver Version
PCI Devices Common Settings:
Above 4G Decoding
This setting Disables or Enables 64-bit capable devices ability to be decoded in above 4G
address space (only if the system supports 64-bit PCI decoding).
SR-IOV Support
If the system has SR-IOV capable PCIe devices, this setting will Disable or Enable the Single
Root IO Virtualization Support for the system.
BME DMA Mitigation
Re-enable Bus Master Attribute is disabled during Pci enumeration for PCI Bridges after SMM
Locked. The options are Disabled and Enabled.
PCIe Spread Spectrum
Use this setting to enable or disable PCIe Spread Spectrum for your system. The options
are Enabled and Disabled.
84