Supermicro AS -5014A-TT User Manual page 70

A+ Workstation AS -5014A-TT User's Manual
•
Under System, select Installation Destination.
•
Under Local Standard Disks, select AMD-RAID Array 01.
•
Under Storage Configuration, select Custom, click Done in the upper left corner, and click
the Click here to create them automatically link.
•
Under Installation:
•
Select DATA/home, change File System from xfs to ext4, select SYSTEM/rhel-root,
change File System from xfs to ext4, select SYSTEM/boot, change File System from
xfs to ext4, and click Done in the upper left corner.
•
In the Summary of Changes window, click Accept Changes.
•
Under Network and Hostname:
•
In the bottom left corner, enter a valid Hostname, and click the Apply button.
•
Select an Ethernet Port, and click Configure in the bottom right corner.
•
Enter valid entries, and click Save.
•
Under Ethernet, click the ON button and click Done In the upper left corner.
14. Click Beginning Installation in the bottom right corner.
15. In the Configuration Window:
•
Click Root Password, enter an applicable root password, re-enter the root password, and
click Done in the upper left corner.
•
Click User Creation, enter a Full Name, a Username, enter an applicable password, re-
enter the user password, and click Done in the upper right corner.
•
When the message "Red Hat Enterprise Linux is now successfully installed and ready for
you to use! Go ahead and reboot to start using it!" appears, click Reboot in the bottom
right corner, and remove the installation device.
16. In the Initial Setup Window, click License Information under Licensing, review the
EULA, select (Check Mark) I accept the License Agreement and click Done in the
upper left corner.
•
Under System, configure Subscription Manager in the bottom right corner, and click Finish
Configuration.
17. Login to the system, select a user, and enter a password.
70