Table of Contents
Advertisement
Mirrorball 10 cm
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
●
Never remove warning or informative labels from the unit.
●
Never leave any cables lying around.
●
Never leave various parts of the packaging (plastic bags, polystyrene foam, nails, etc.) within
children's reach, as they are potential sources of danger.
●
Do not open the device and do not modify the device.
●
Do not shake the device. Avoid brute force when installing or operating the device.
●
Only use the device indoors, avoid contact with water or other liquids.
●
Only operate the device after having checked if the housing is firmly closed and all screws are tightly
fastened.
●
Only operate the device after having familiarized with its functions.
●
Avoid flames and do not put close to flammable liquids or gases.
●
Make sure that the device is not exposed to extreme heat, moisture or dust.
●
Make sure that the rotation of the mirror ball is not interrupted in any way by decoration parts, etc.
●
Make sure that the mirror ball cannot start to swing due to air streams, etc. The mirror ball and the
motor should be hanged and operated absolutely vibration-free.
●
Regularly examine whether the keyring or the chain has any deformations. If you find any,
immediately detach the mirror ball.
●
The length of the chain with the mirror ball may never exceed 100 cm.
●
If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
●
If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
●
For adult use only. The device must be installed beyond the reach of children. Never leave the unit
running unattended.
●
The user is responsible for correct positioning and operating of the device. The manufacturer will not
accept liability for damages caused by the misuse or incorrect installation of this device.
●
WARRANTY: Till one year after date of purchase.
Operating Determinations
●
This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
●
To eliminate wear and improve lifespan, during periods of non-use, completely disconnect from
power via breaker or by unplugging.
●
The maximum ambient temperature t
●
The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.
●
If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
●
Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Ordercode: 60413
= 40 °C must never be exceeded.
a
3
Advertisement
Table of Contents
