Chapter 1-General Information; Introduction; Related Manuals - Anritsu Field Master MS2070A Measurement Manual

Chapter 1 — General Information
1-1

Introduction

This measurement guide describes the spectrum analyzer measurement functions of the Anritsu Field Master
Series and Remote Spectrum Monitor instruments. Basic spectrum analyzer functions are included with all
Anritsu spectrum analyzers. Advanced functions are available only when the related option is installed and
activated. Refer to Section 1-2 "Option Descriptions"
option. Refer to Chapter 2
on the spectrum analyzer setup and measurement settings.

Related Manuals

For additional information and literature covering your product, visit the product page of your instrument and
select the Library tab:
http://www.anritsu.com/en-US/test-measurement/products/ms2090a
http://www.anritsu.com/en-us/test-measurement/products/ms2080a
http://www.anritsu.com/en-us/test-measurement/products/ms2070a
https://www.anritsu.com/en-US/test-measurement/products/ms2720xa
Product Information, Compliance, and Safety
Read the Product Information, Compliance, and Safety Guide for important safety, legal, and regulatory
notices before operating the equipment:
• Field Master Series – PN: 10100-00069
• Remote Spectrum Monitor – PN: 10100-00064
User Guide
For a complete overview of the instrument hardware and system functions, refer to your instrument user
guide. The user guide provides information on the following topics:
• Listing of all related documentation such as measurement guides, programming and maintenance
manuals.
• Instrument Care, maintenance and calibration.
• External Connections to the top and side panels.
• Power Requirements and Battery Information.
• System settings such as Wi-Fi, GNSS/GPS, date/time, language settings, etc.
• Other advanced settings and tools such as file management, screenshot settings, port setup, and option
configuration.
• Diagnostics and software updates.
Spectrum Analyzer MG
for an overview of the spectrum analyzer interface. Refer to
PN: 10580-00447 Rev. E
for references regarding the discussion of the supported
Chapter 3 for discussion
1-1