Anritsu Field Master MS2070A Measurement Manual page 105

Spectrum Analyzer Measurements
1. The coverage mapping status panel provides quick access to common settings and allows you to start and stop
a coverage mapping measurement. A color-coded signal-strength legend is shown at the bottom of the panel.
See "Map Tool" on page
2. Select map zoom tool to increase (+) or decrease (-) zoom level. You can also drag the zoom level indicator up
or down, or you can pinch to change zoom level.
3. Tabular measurement data shows the current measurement, measurement value in addition to the list of the
created region names.
4. The map display area shows map data for the current area and color-coded dots corresponding to the signal
colors that are set up for the recorded measurement data.
5. Map scale shows length for both imperial (miles) and metric (kilometers) units.
6. Re-centering tool centers the current location on the map.
7. Select SETUP menu to configure coverage mapping measurement settings. See
Mapping)" on page 3-91.
8. Select pencil icon to edit or rename the saved name of the available map.
9. Select trash can icon to delete the unwanted map (s).
10.Select + ADD MORE MAPS to open
11. Select + ADD MAPS to add maps.
Figure 3-69. Coverage Mapping (Outdoor) (2 of 2)
Spectrum Analyzer MG
3-93.
"Map Tool" of Tools menu.
PN: 10580-00447 Rev. E
3-19 Coverage Mapping (Option 431)
"SETUP Menu (Coverage
3-87