Waste Toner; Waste Toner Bottle - Ricoh MP C307 Field Service Manual

Waste Toner

Waste Toner

Waste Toner Bottle

Before Replacing the Waste Toner Bottle
When you replace the waste toner bottle AFTER a waste toner full or near-full message appears on the
operation panel, the PM counters are automatically cleared after turning the main power ON.
When you replace the waste toner bottle BEFORE a waste toner full or near-full message appears on the
operation panel, do the following procedure to reset the PM counter.
1. Turn the power ON.
2.
Reset the PM counter. (Refer to
3. Turn the power OFF.
Replacing the Waste Toner Bottle
1. Pull out the paper tray.
2.
Open the front cover.
3.
Pull out the waste toner bottle [A].
Replacement Procedure of the PM/Yield Parts)
255