Anti-condensation Heater (Mainframe)
Installation Procedure
•
Do not lift the machine together with one or more paper feed unit(s):
If there is already a machine with one or more optional paper feed unit(s), be sure to disconnect the
machine and paper feed unit(s), and lift them up separately when moving/transporting. Otherwise, the
handle of the paper feed unit will break due to the mainframe's weight, and it can cause an injury.
•
Turn OFF the main power and unplug the power cord from the wall socket. If installing without
turning OFF the main power, an electric shock or a malfunction may occur.
1.
Remove the following items.
•
Paper tray
•
Waste toner bottle
•
Left cover
(Left
•
Rear cover
(Rear
•
PSU fan
(PSU
2.
Do the following steps:
•
Insert the heater harness into the hole [A].
•
Fit the bosses of the heater into the holes [B] to install the heater [C] (
•
Use a short screwdriver to secure the screw.
(Waste Toner
Bottle)
Cover)
Cover)
Fan)
(M3×6) × 1)
81