Settings Relevant To The Service Contract - Ricoh MP C307 Field Service Manual

Mainframe Installation
3. Open the front cover.
4. Remove the inner cover [A] (

Settings Relevant to the Service Contract

Change the necessary settings for the following SP modes if the customer has made a service contract.
•
You must select one of the counter methods (developments/prints) in accordance with the contract
(SP5-045-001).
Counting method
SP No. Function
SP5-045-001 Specifies if the counting method used in meter charge mode is based on
developments or prints.
NOTE: You can set this one time only. You cannot change the setting after you
have set it for the first time.
Service Tel. No. Setting
SP No. Function
SP5-812-001 SP5-812-002 programs the service station fax number. The number is printed on
× 1) and then store the decal in the area [B].
Default
"1":
Prints
Default
-
45