Preventive Maintenance Tables; Maintenance Tables; Preventive Maintenance Items For Mp C307 - Ricoh MP C307 Field Service Manual

2.Preventive Maintenance Tables

2. Preventive Maintenance Tables

Maintenance Tables

Preventive Maintenance Items For MP C307

Chart: A4 (LT)/5%
Mode: 2 prints/job
Color Ratio: 30%
Environment: Normal temperature and humidity
Yield may change depending on circumstances and print conditions.
Symbol keys: C: Clean, R: Replace, L: Lubricant, I: Inspect
Yield Parts:
The parts mentioned in these tables have a target yield. However, the total copy/print volume made by the
machine will not reach the target yield within the machine's targeted lifetime if the machine is used under the
target usage conditions (ACV, color ratio, and P/J). So, these parts are categorized not as PM parts but as yield
parts (EM parts). In this table, the parts with "Y" are yield parts and the parts with "P" are PM parts.
ADF
The PM count for the following items is based on the number of originals fed:
Item
Friction pad
ADF pick-up roller
ADF feed roller
ADF entrance roller
Pre-scanning roller (front side/ rear side)
ADF exit roller
* The actual lifetime of these parts depends on the type of paper used and machine operation. Therefore, these
parts are treated as Yield Parts.
Scanner Unit
Item
Exposure glass
ADF exposure glass
16
PM/Yield Parts
Y*
Y*
Y*
PM/Yield Parts
30k 45k EM
R C
R C
R C
C
C
C
EM
C Clean with a cleaning cloth.
C Clean with a cleaning cloth.
Remarks
Wipe with a dry cloth.
Wipe with a damp cloth.
Wipe with a damp cloth.
Wipe with a damp cloth.
Wipe with a damp cloth.
Wipe with a damp cloth.
Remarks