Scanner Service Mode; Sp1-Xxx (System And Others) - Ricoh MP C307 Field Service Manual

Scanner Service Mode

SP1-XXX (System and Others)

1001 [Scan Nv Version]
1-001- -
005
Operates automatic initialization to ensure that scanner NV is initialized if necessary. To do this SP,
specify the version of scanner NV within 9 characters.
"Function name"_"Machine code"_"Serial number"
- Function name: Enter "3".
- Machine code: Enter the machine code with three characters.
- Serial number: Enter the number (default: 001).
1005 [Erase margin(Remote scan)]
1-005- Range from 0 to 5 mm
001
Creates an erase margin for all edges of the scanned image.
If the machine has scanned the edge of the original, create a margin. This SP is activated only when
the machine uses TWAIN scanning.
1009
1-009-001
1010 [Non Display ClearLight PDF]
1-010-001 0:Display 1:Nondisplay
Display or nondislay ClearLight PDF function.
1011
1-011-001
1012 [UserInfo Release]
1-012-001 0:No 1:Yes
Set if the following user information is released or not.
- Destination of the mail, folder, CS
- Sender
- Message
*CTL
[Remote scan disable]
0:enable 1:desable
Enable or disable remote scan.
[Org Count Disp]
0:ON 1:OFF
Display or nondislay original counter.
0: Displays remaining memory.
1: Displays original counter.
[0 to 5 / 0 / 1 mm/step]
*CTL
*CTL
*CTL
*CTL [0 or 1 / 0 / - /step]
*CTL [0 or 1 / 1 / - /step]
3.SP Mode Tables
-
[0 or 1 / 0 / - /step]
[0 or 1 / 0 / - /step]
365