Controller Options
9.
Input [IP Address], [Subnet Mask] and [Default Gateway].
10. Set other items if necessary.
11. Press [Set].
12. Close the web browser.
13. Disconnect the Ethernet cable from the PC.
14. Connect the Ethernet cable to a network device (e.g. switching hub).
15. Set the IP address of this option in the printer driver which you use.
Extended USB Board Type M19 (D3BS-01)
•
Turn OFF the main power and unplug the power cord from the wall socket. If installing without
turning OFF the main power, an electric shock or a malfunction may occur.
You can only install one of the following network interfaces at a time:
•
File Format Converter
•
IEEE 1284 Interface Board
•
IEEE 802.11a/g/n Interface Unit
•
USB Device Server Option
•
Extended USB Board
1.
Remove the slot cover [A].
167