Ricoh MP C307 Field Service Manual page 469

SC8xx: Overall System
SC8xx: Overall System
No. Type
SC816-** [0x0000] Energy save I/O subsystem error
SC816-01 D
SC816-02 D
SC816-03 D
SC816-04 D
SC816-05 D
SC816-07 D
SC816-08 D
SC816-09 D
SC816-10 to D
12
SC816-13 D
SC816-14 D
SC816-15 to D
18
SC816-19 D
SC816-20 D
SC816-22 D
SC816-23, D
24
SC816-25 D
SC816-26 to D
28
SC816-29, D
30
SC816-35 D
SC816-36 to D
96
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Subsystem error
Sysarch (LPUX_GET_PORT_INFO) error
Transition to STR was denied.
Interrupt in kernel communication driver
Preparation for transition to STR failed.
Sysarch (LPUX_GET_PORT_INFO) error
Sysarch (LPUX_ENGINE_TIMERCTRL) error
Sysarch (LPUX_RETURN_FACTOR_STR) error
Sysarch (LPUX_GET_PORT_INFO) error
open() error
Memory address error
open() error
Double open() error
open() error
Parameter error
read() error
write () error
write() communication retry error
read() communication retry error
read() error
Subsystem error
Energy save I/O subsystem detected some abnormality.
•
Energy save I/O subsystem defective
•
Energy save I/O subsystem detected a controller board error (non-response).
•
Error was detected during preparation for transition to STR.
•
C816-99 occurs as a subsystem error except any error from -06 to 96.
Check if the SC occurs by turning the power OFF then ON. If the SC occurs again, do
463