Table of Contents
Advertisement
2.5.
Connection - video sources
It is possible to connect two after-market video-sources, an after-market rear-view camera
and an after-market front camera to the video-interface.
Connect the 12pin interface cable's female 12pin connector to the male 12pin connector of
the video-interface.
Connect the video RCA of the rear-view camera to the 12pin interface cable's female
RCA connector
„Reverse
Connect the front camera's video RCA connector to the 12pin interface cable's female
RCA connector
„Front
V3".
Connect the video RCA of the AV source 1 and 2 to the 12pin interface cable's female RCA
connector
"Left (V1)"
and
Version 26.05.2023
V4.
"Right
(V2)".
HW: CAM(V100)/(V52)
RL4-NAC08
Advertisement
Table of Contents
