Table of Contents
Advertisement
2.6.
Connection - Video-sources
It is possible to connect two after-market video sources and one after-market rear-view
camera to the video-interface.
Before final installation of the peripheral devices, we recommend a test-run to detect a
incompatibility of vehicle and interface. Due to changes in the production of the vehicle
manufacturer there's always a possibility of incompatibility.
Connect the video cable's female 6pin connector to the video interface's male 6pin
connector.
Connect the RCA of the video source 1 and video source 2 to the video cable's female
RCA
„Video
IN1" and
Connect the rear-view camera's RCA to the video cable's female RCA
Version 09.02.2023
„Video
IN2".
HW: CAM(V31)/(V22)
„Camera
IN".
RL2-MZD
Advertisement
Table of Contents
