Table of Contents
Advertisement
All manuals and user guides at all-guides.com
2.8.
Connection - video sources
It is possible to connect an after-market rear-view camera, an after-market front camera and
two more video sources to the video-interface.
Before a final installation of the video sources, we recommend a test-run to ensure the
compatibility of vehicle and interface. Due to changes in the production of the vehicle
manufacturer there's always a possibility of incompatibility.
Connect the female 12pin connector of the 12pin interface cable to the male 12pin
connector of the video-interface.
Connect the video RCA of the Rear-view camera to the female RCA connector
"Reverse (V4)"
of the 12pin interface cable.
(refer also to chapter "after-market rear-view camera").
Connect the video RCA of the front camera to the female RCA connector
"Front (V3)"
of the
12pin interface cable.
(refer also to chapter "After-market front camera").
Connect the video RCA of the video source 1 and 2 to the female RCA connector
„Left (V1)"
and
„Right (V2)"
of the 12pin interface cable.
Version 10.08.2020
HW:CAM(V98)/(V31/ZK)
RL4-LR17
Advertisement
Table of Contents
