Connection - Video-Sources - NavLinkz RL4-LR16-8 Manual

2.6. Connecting video sources
It is possible to connect an after-market rear-view camera, a front camera and two more
after-market video sources to the video-interface.
Before a final installation of the video sources, we recommend a test-run to ensure the
compatibility of vehicle and interface. Due to changes in the production of the vehicle
manufacturer there's always a possibility of incompatibility.
Connect the 12pin interface cable's female 12pin connector to the male 12pin connector of
the video-interface.
Connect the video RCA of the Rear-view camera to the 12pin interface cable's female
RCA connector „Reverse
Connect the front camera's video RCA connector to the 12pin interface cable's female
RCA connector „Front V3".
Connect the video RCA of the AV source 1 and 2 to the 12pin interface cable's female RCA
connector "Left (V1)" and
Version 17.02.2022
V4.
"Right (V2)".
HW: CAM(V100)/(V20) and CAM(V100)/(V20)GD RL4-LR16-8/10