Table of Contents
Advertisement
2.7.
Connection - video sources
It is possible to connect an after-market rear-view camera, an after-market front camera and
two more video sources to the video-interface.
Before the final installation, we recommend a test-run of the interface. Due to changes in
the production of the vehicle manufacturer, there's always the possibility of
incompatibility.
Connect the 12pin interface cable's female 12pin connector to the male 12pin connector of
the video-interface.
Connect the video RCA of the Rear-view camera to the 12pin interface cable's female
RCA connector
„Reverse
Connect the front camera's video RCA connector to the 12pin interface cable's female
RCA connector
„Front
V3".
Connect the video RCA of the AV source 1 and 2 to the 12pin interface cable's female RCA
connector
"Left (V1)"
and
Version 01.04.2022
V4.
"Right
(V2)".
HW: CAM(V100)/(V32)
RL4-R40
Advertisement
Table of Contents
