Oce CS6410 Basic Operation Manual page 36

Tension bar
Feed switch
(black)
CAUTION
- Do not rotate the peel roller, or the printer may be
damaged.
19
S E T M E D I A
✻ O K ?
P R E P A R I N G M E D I A
P L E A S E W A I T
36
Océ CS6410 Basic Operation Guide
Peel roller
Tension bar
Peel roller
Supply-side slack sensor
(1) Press the tension bar to the peel roller's
upper part.
(2) By pressing the supply-side media advance
black switch, create a slack area in the media.
Then, with slightly pressing the tension bar
in the direction of the media rear side, install
the tension bar in the slack.
Slacken off to a level lower than the supply-side slack
sensor.
When the slack reaches the sensor detection area, the
operation panel blips.
Press the key.
Tension bar
Scroller
Scroller fl ange