Oce CS6410 Basic Operation Manual page 87

6
Knob
7
8
9
Spittoon case
10
Spittoon unit
Close the capping cover and then close the front cover.
11
The carriage returns automatically to the home position.
Press the knob at the near side of the case
Discharge
containing the spittoon absorber liquid to
open the lid, raise the front side of the spittoon
absorber liquid case to discharge the spittoon
absorber liquid to the backside.
The discharged spittoon absorber liquid will go into
the waste ink bottle.
When discharge is completed, put the spittoon
absorber liquid case back into the original position.
Hold the fi nger grip at the spittoon case's both
side.
Then remove the spittoon case by lifting
upward.
Spittoon case
Set a new spittoon case's locating hole to the
protrusion, and fi x it horizontally by pressing
slightly.
Moisten the spittoon case with the spittoon
Dropper
absorber liquid using a dropper.
Confi rm that the spittoon absorber liquid's top
surface is as high as the top of the protrusions.
Liquid level
- In the spittoon case, the spittoon absorber liquid is
Top of the
protrusions
CAUTION
absorbed by the sponge, which may lower the liquid's
top surface.
In such a case apply the liquid additionally.
87