Oce CS6410 Basic Operation Manual page 72

Printing is slow.
The carriage sometimes moves.
Items to be checked
USB connection speed
Printing is slow.
During print, print heads are capped frequently.
Items to be checked
High-temperature environment If the Printer temperature is 40°C or more, the Printer prints at a lower printing speed.
Additionally connected device
transmitting enormous volume
of data
Computer's specifi cation
Computer's additional job
processing
You cannot understand the current operation panel display language.
Items to be checked
Language setting
72
Océ CS6410 Basic Operation Guide
When the data transmission speed is slow, the Printer waits for the data with the print
heads capped.
Check the USB's transmission speed. If the USB is connected at full speed mode, the
speed is improved by changing the condition to connect to the computer as follows,
so that it is connected at high speed mode.
- Re-connect the USB cable.
- Connect the USB cable to the USB 2.0 port.
- Re-install the driver.
- Change the USB cable to the one supporting the high speed transmission.
- If a hub is applied, change the hub to the one supporting the high speed transmission.
Set the ambient temperature to 20 to 25°C (recommended temperature), and hold
the Printer for one hour or more. Then start printing.
Remove the additional device connected to the USB.
Recommended system confi guration
- Windows™ XP Professional (SP2)
- Dual-core, 2.0GHz or more
- Memory, 2GB or more
- HDD, 100GB or more
- 2-port USB 2.0, for Dongle and Printer
- DVD-ROM drive, to install the RIP software
Apply the computer containing the recommended system confi guration below.
Terminate the other application software, for example, anti-virus software.
Start with the Printer powered off . At the operation panel, press the
hold it down. While holding the
down. Continue to hold down both keys. Then the language selection menu should now
appear on the operation panel display. Highlight your preferred language with the
and keys, then press the
Corrective measures
Corrective measures
Corrective measures
key down, press the POWER switch and hold it
M E N U
key.
key and
M E N U