Table of Contents
Advertisement
Other precautions
Media loses its color and quality with age. Check the media condition and select the media with better
condition.
Cut the media carefully, as its paper dust may cause bubble surface at laminated.
When adhesive-backed media is applied, some adhesive agent may be left on the platen, which
may cause a media jam. So clean the agent completely with a soft cloth moistened with the neutral
detergent.
Available area on media
The available area on media in scanning direction depends on media width, media edge guards application,
and stripe bar presence. With the media edge guards and stripe bar applied, your available area is decreased by
34.9mm in right and 10.0mm in left. The available are is decreased more when the optional product below is
applied:
- Wide type media edge guards for platen sheet
Without wide type media edge guards for platen
sheet
Color stripe
Media edge guards
Color stripe
Media edge guards
Color stripe
Media edge guards
Color stripe
Media edge guards
With wide type media edge guards
Color stripe
Media edge guards
Color stripe
Media edge guards
:YES
34.9mm
:YES
:YES
29.9mm
:NO
:NO
10.0mm
:YES
:NO
5.0mm
:NO
:YES
41.9mm
:YES
:NO
15.0mm
:YES
Printable area
10.0mm
5.0mm
10.0mm
5.0mm
Media width
Printable area
15.0mm
15.0mm
Media width
13
Advertisement
Table of Contents
