Oce CS6410 Basic Operation Manual page 30

3
4
Power ON/OFF switch
B o o t i n g u p . . .
I N I T I A L I Z I N G . . .
P L E A S E W A I T
L O A D M E D I A
CAUTION
Except for emergency, turn off the power while a message "PRINTER READY" is displayed. If the power is turned off
unnecessarily when the Printer is performing "INITIALIZING... " or "CLEANING, " the ink may drool, the print head may be
damaged, or saved parameters may be lost.
To load media on the Printer
This section uses banner to explain the media loading procedure.
1
30
Océ CS6410 Basic Operation Guide
Switch on (I)
MENU ONLINE
HEATER CANCEL
Set the printer power switch and heater power
switch to on, the side marked with I.
Press the power switch on the operation panel.
When the power switch is turned on, the Printer
performs the power-on self-diagnostic test and
displays the following message on the operation
panel.
If an error message appears...
- To recover the error, refer to "When
encountering a problem."
- If the POWER LED on the operation panel does
not light even when the printer and heater
power switches at the rear of the Printer and
the power ON/OFF switch on the operation
panel are turned on, the power supply has a
problem.
Put the media on the table.