Table of Contents
Advertisement
4
# R E S E A T P R I N T H E A D
✻ O K ?
C A R R I A G E M O V I N G
P L E A S E W A I T
O P E N C O V E R
R E S E A T P R I N T H E A D
CAUTION
To prevent the ink dried inside the print head's nozzles:
- Do not leave the Printer with the carriage detached from the capping unit.
- Within 5 minutes, complete the capping unit's cleaning operation and cap the print head.
5
6
7
8
Spittoon unit
Knob screw
Press the
key.
The carriage moves.
The Printer issues an audio warning beep.
- When the carriage moves, the Printer issues an
audio warning beep.
To unactivate the warning beep, see the
Advanced Operation Guide on the page 38.
Open the front cover and then open the
capping cover.
Remove the knob screw of the spittoon unit
and remove the spittoon unit.
CAUTION
- The spittoon unit contains cleaning liquid. Be
careful not to spill it.
Soak the cleaning swab in the cap cleaning
liquid.
TIP
- To prevent the cap cleaning liquid
contaminated, in the cap cleaning liquid bottle
do not soak the cleaning swab after you clean
with it.
- The cleaning swab is intended for a single
use only. Use a new cleaning swab for each
cleaning.
Manually slide the carriage to the position
where you removed the spittoon unit.
63
Advertisement
Table of Contents
