Oce CS6410 Basic Operation Manual page 50

2
3
Adjust the paper tube fl ange position.
4
By loosening the handle, adjust the paper tube position or the paper tube fl ange position so that the distance
between the media edge and the two paper tube fl anges would be 3 to 5mm.
After the adjustment, fi x the paper tube by rotating the handle.
Media
NG
Paper tube
OK
50
Océ CS6410 Basic Operation Guide
Flange
NG
Handle
Paper tube flange
Media
Paper tube
Paper tube flange
3〜5mm
(Distance between the media edge and
each paper tube flange)
Mount the scroller to the take-up roll.
which will make the operation easier from this step.
By pressing the key, feed the media until
the front media edge is wound on the paper
tube.
F E E D I N G M E D I A
Rubber spacer C
Media
Paper tube
Paper tube flange
Clear this gap.
Flange
Handle