Table of Contents
Advertisement
Installer Manual Fleck 4600 SXT - Maintenance
9.2.8. Injector cleaning
No.
A
Using a flat screwdriver or a 8 mm wrench, remove the screws (6).
B
Remove the cap injector (5).
C
Remove the seal (4).
D
Remove the filter (2).
E
Using a flat screwdriver, remove the injector nozzle (3).
F
Using a flat screwdriver, remove the injector throat (1).
G
Clean or change the injector throat (1), the injector nozzle (3), the filter (2) and the seal (4).
H
Lubricate all seals with approved lubricant only.
I
Reverse above procedure steps to rebuild.
76 / 98
Operation
Ref. MKT-IM-028 / A - 03.07.2018
Advertisement
Table of Contents
