9.2.2. Controller replacement
No.
Using a Philips screwdriver, unscrew (1) and remove the cover (2) paying attention for the
A
wire.
B
Press the board clips (3) and release the controller cover (6).
C
Using a flat screwdriver, unscrew (5) and remove the controller (4).
D
Remove carefully the wire connectors (7).
E
Connect the new controller, see 5.7.1. Electrical connections, page 42.
F
Reverse above procedure steps to rebuild.
Ref. MKT-IM-028 / A - 03.07.2018
Installer Manual Fleck 4600 SXT - Maintenance
Operation
67 / 98