User manual
P/N 3-9008-507
Figure 4-6: Typical installation for the RME
4.3.8
Install the security seal
Security seals protect the integrity of the turbine meter metrology and prevent
preamplifier and pickoff tampering. Follow the steps below to seal the electronics
enclosure of the Daniel 1500 LTM after commissioning. The security seal wires are
commercially available.
CAUTION
CUTTING HAZARD
Sharp edges may be present on the band shrouds. Wear appropriate personal protective
equipment when working on the turbine meter.
Failure to comply may cause serious injury.
User manual
USER MANUAL
Prepare the turbine meter for use
September 2020
www.Daniel.com
59
55