DANIEL 1500 Series User Manual page 40

SERIES 1500 LIQUID TURBINE METER
User manual
P/N 3-9008-507
2.2.2 Requirements and limitations for installation
Figure 2-2: Typical installation for a Series 1500 LTM
•
•
Important
A spool piece installed in place of the turbine meter is recommended for this procedure.
NOTICE
Comply with local government regulations and company requirements.
User manual
40
www.Daniel.com
Note the direction of flow indicated on the plate near the inlet flange and install
accordingly.
New installations: Flush lines thoroughly to rid piping of potentially damaging foreign
material such as welding bead, pipe scale, etc. before the turbine meter is placed into
service.
Operating conditions and specifications
September 2020
43