Table of Contents
Advertisement
Operating conditions and specifications
September 2020
User manual
P/N 3-9008-507
3
3.1
3.1.1
3.2
3.2.1
3.2.2
User manual
Turbine meter handling
Receive the turbine meter
WARNING
EQUIPMENT HANDLING AND OPERATING HAZARD
Wear personal protective equipment appropriate to the situation when working with
the turbine meter. Adhere to all safety standards and best practices for operating the
equipment.
Failure to comply may result in death or serious injury.
Unpack and inspect the turbine meter
Inspect the turbine meter upon receiving at the customer facility.
Procedure
1. Remove the turbine meter from the shipping container.
2. Inspect the turbine meter for damage.
3. See
Installation procedure
Store the turbine meter
Rust inhibitor
Apply light oil or rust inhibitor on surfaces that are in contact with the environment only if
the turbine meter body is carbon steel.
Pack the turbine meter
Procedure
1. Use stretch wrap (not adhesive) to attach the correct size flange cover to the
turbine meter end flanges. This protects the unpainted surfaces of the flange
sealing.
2. A flush contact between the flange cover and the flange sealing face is important.
for Installation procedure.
User manual
P/N 3-9008-507
USER MANUAL
Turbine meter handling
September 2020
47
43
www.Daniel.com
Advertisement
Table of Contents
