DANIEL 1500 Series User Manual page 48

SERIES 1500 LIQUID TURBINE METER
Prepare the turbine meter for use
September 2020
•
•
Important
Never allow the slings to come in contact with the electronics enclosure. Damage to the
enclosure may occur.
Figure 4-2: Incorrect sling attachment
LIFTING HAZARD
Lifting the turbine meter with the upper enclosure installed but without the bolts
installed, may cause the electronics to fall.
Doing this may cause injury and/or damage the equipment.
•
52
48
www.Daniel.com
Only use slings with ratings that exceed the weight to be lifted. Reference your
company's standards for safety factors that must be included when calculating the load
rating.
If the slings do come in contact with the electronics, use a spreader bar on the sling to
prevent contact with the electronics.
CAUTION
Never apply shock loads to the turbine meter. Always lift the turbine meter gradually. If
shock loading occurs, inspect the slings per manufacturer's recommendations prior to
further use.
P/N 3-9008-507
Daniel Series 1500 Liquid Turbine Meter, NPS 1-2.5
User manual