Table of Contents
Advertisement
Available languages
Available languages
V 3.04
10. Never force the saw. Forcing the saw can cause uneven cuts, loss of accuracy, and possible
kickback. Push the saw forward at a speed so that the blade cuts without slowing.
VIBRATION PRECAUTIONS
This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or
permanent physical injury, particularly to the hands, arms and shoulders.
1.
Anyone using vibrating tools regularly or for an extended period should first be examined by
a doctor and then have regular medical check-ups to ensure medical problems are not being
caused by or worsened from tool use. Pregnant women or people who have impaired blood
circulation to the hands, past hand injuries, nervous system disorders, diabetes or Raynaud's
Disease should not use this tool. If you feel any medical symptoms related to vibrations
(such as tingling, numbness, and white or blue fingers), seek medical attention as
soon as possible.
2.
Do not smoke during use. Nicotine reduces the blood flow to the hands and fingers,
increasing the risk of vibration-related injury.
3.
Wear suitable gloves to reduce the vibration effects on the user. Gloves must not
be loose fitting.
4.
Use tools with the lowest amount of vibration when there is a choice between
different processes.
5.
Do not use for extended periods. Take frequent breaks when using this tool.
6.
Let the tool do the work. Grip the tool as lightly as possible (while still keeping safe
control of it).
7.
To reduce vibrations, maintain the tool as explained in this manual. If abnormal vibrations
occur, stop using this tool immediately.
TOOL USE AND CARE
WARNING! Do not use the tool if the throttle does not function properly. Any tool that cannot be
controlled with the ON / OFF switch is dangerous and must be repaired.
1.
Use the correct tool for the job. Maximise performance and safety by using the tool for its
intended task.
2.
Do not modify this tool or use for a purpose for which it was not designed.
3.
This tool was designed for a specific function.
Do Not:
a.
Modify or alter the tool, all parts and accessories are designed with built-in safety
features that may be compromised if altered.
b.
Use the tool in a way for which it was not designed.
4.
Avoid unintentional starts. Be sure the throttle is in the OFF position when not in use and
before connecting it to any power source.
5.
Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed
from the tool before connecting it. A wrench or key that is left attached to a rotating part of
the tool increases the risk of personal injury.
6
9A Reciprocating Saw
For technical questions call: 1-800-665-8685
8507626
Advertisement
Table of Contents
