Table of Contents
Advertisement
Available languages
Available languages
9095746
7.
Support large panels to minimize the risk of blade pinching and kickback.
Large panels tend to sag under their own weight. Supports must be placed
under the panel on both sides, near the line of cut and near the edge of
the panel.
ELECTRICAL SAFETY
WARNING! Do not touch or handle a live tool with any part of your body
that is wet or damp. Wet skin reduces resistance to electrical current,
increasing the danger of a serious or fatal shock.
1.
Do not alter any parts of the tool or accessories. All parts and accessories
are designed with built-in safety features that may be compromised if
altered.
2.
Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3.
Do not expose the saw to rain, snow, frost or any other damp or wet
conditions. Water entering a tool will increase the risk of electric shock.
4.
Hold the tool by the insulated gripping surfaces when performing an
operation where the cutting accessory may contact hidden wiring. Contact
with a live wire will also make exposed metal parts of the power tool live
and shock the operator.
BATTERY SAFETY
WARNING! Only charge a battery with a charger designed for that purpose.
Do not use modified chargers or a charger that does not specify the
voltage, amperage or recharge rate. Improper charging can lead to battery
rupturing.
WARNING! Do not charge a damaged or frozen battery. Contact your local
municipality for proper disposal procedures. Consult the Safety Data
Sheet (SDS) for your battery before use or maintenance.
1.
Do not expose the battery to heat or throw it in a fire. The contents are
flammable and the battery may explode. Remove any source of ignition
such as an open flame or a tool like a heater from the area.
2.
Do not inhale smoke issuing from a burning battery, as it is toxic.
3.
Do not disassemble or crush the battery as the contents are corrosive
and flammable. Exposure may cause an injury. There is a risk of
8
20V Li-Ion Cordless Brushless Compact Band Saw
For technical questions call 1-800-665-8685
V1.0
Advertisement
Table of Contents
