Hyundai Yeni i20 2023 Owner's Manual page 622

Maintenance
Daytime Running Light (if equipped)
Daytime Running Light & Position Light Daytime Running Light & Position Light
1. Remove the under cover by rotating
the screws and bolts.
2. Reach your hand into the back of the
front bumper.
3. Disconnect the power connector from
the socket.
4. Remove the bulb-socket from the
housing by turning the socket counter-
clockwise until the tabs on the socket
align with the slots on the housing.
5. Install the new bulb-socket into the
housing by aligning the tabs on the
socket with the slots in the housing.
Push the socket into the housing and
turn the socket clockwise.
6. Connect the power connector to the
socket.
7. Reinstall the front bumper under cov-
er.
Position light, Daytime running light
(LED type)
If the LED lamp does not operate, we rec-
ommend that the system be inspected by
an authorized HYUNDAI dealer. The LED
lamps cannot be replaced as a single unit
because it is an integrated unit. The LED
lamp has to be replaced with the unit.
Unless a skilled technician checks or
repairs the LED lamp, it may damage
related parts of the vehicle.
9-74
Type D (LED)
OBC3093038L OBC3093038L
Type E (LED)-N line
(1) Headlight (Low)
(2) Headlight (High)
(3) Static Bending Light
(4) Turn signal light
(5) Daytime running light & Position light
(6) Front fog light
OBC3093037L OBC3093037L
OBC3TN091001 OBC3TN091001