Hyundai Yeni i20 2023 Owner's Manual page 521

7. Place the jack at the designated jack-
ing position under the frame clos-
est to the tire you are changing. The
jacking positions are plates welded
to the frame with two notches. Never
jack any other position or part of the
vehicle. Doing so may damage the
side seal molding or other parts of the
vehicle.
8. Insert the jack handle into the jack and
turn it clockwise, raising the vehicle
until the tire clears the ground. Make
sure the vehicle is stable on the jack.
9. Loosen the lug nuts with the wheel
lug nut wrench and remove them with
your fingers. Remove the wheel from
the studs and lay it flat on the ground
out of the way. Remove any dirt or
debris from the studs, mounting sur-
faces, and wheel.
10. Install the spare tire onto the studs of
the hub.
11. Tighten the lug nuts with your fingers
onto the studs with the smaller end of
OBC3083007L OBC3083007L
the lug nuts closest to the wheel.
12. Lower the vehicle to the ground by
turning the jack handle counterclock-
wise.
13. Use the wheel lug nut wrench to tight-
en the lug nuts in the order shown.
Double-check each lug nut until they
are tight. After changing tires, we rec-
ommend that an authorized HYUNDAI
OBC3083008L OBC3083008L
dealer tighten the lug nuts to their
proper torque as soon as possible. The
wheel lug nut should be tightened
to 11~13 kgf.m (79~94 lbf.ft, 107~127
N.m).
08
OBC3083009L OBC3083009L
8-17