Hyundai Yeni i20 2023 Owner's Manual page 511

i
Information
An inappropriately disposed
battery can be harmful to the
environment
health. Dispose of the battery
Pb
according to your local law(s)
or regulations.
Jump starting procedure
1. Position the vehicles close enough
that the jumper cables will reach, but
do not allow the vehicles to touch.
2. Avoid fans or any moving parts in the
engine compartment at all times, even
when the vehicles are turned off.
3. Turn off all electrical devices such as
radios, lights, air conditioning, etc. Put
the vehicles in P (Park, for automatic
transmission/dual clutch transmission
vehicle) or neutral (for manual trans-
mission vehicle), and set the parking
brakes. Turn both vehicles OFF.
CAUTION
Before jump starting, make sure to cor-
rectly identify the positive (+) and nega-
tive (-) terminals to avoid reverse polar-
ity connections.
and human
4. Connect the jumper cables in the
exact sequence shown in the illustra-
tion. First connect one jumper cable to
the red, positive (+) jumper terminal of
your vehicle (1).
5. Connect the other end of the jumper
cable to the red, positive (+) battery/
jumper terminal of the assisting vehi-
cle (2).
6. Connect the second jumper cable to
the black, negative (-) battery/jumper
terminal of the assisting vehicle (3).
7. Connect the other end of the second
jumper cable to the black, negative (-)
battery/jumper terminal of your vehi-
cle (4).
Do not allow the jumper cables to
contact anything except the correct
battery or jumper terminals or the
correct ground. Do not lean over the
battery when making connections.
8. Start the engine of the assisting vehi-
cle and let it run at approximately
2,000 RPM for a few minutes. Then
start your vehicle.
Do not connect the jumper cable to
the negative (-) jumper terminal of the
discharged battery. A spark could cause
the battery to explode and lead to a per-
sonal injury or vehicle damage.
WARNING
08
1VQA4001 1VQA4001
8-7