Installation; Unpacking And Inspection; Identification Of Loose-Shipped Parts - Cornelius 326142000 Service Manual

(solid-state) post-mix dispenser two-flavor/hot-gas defrost with v3 electronics
Table of Contents

Advertisement

This section covers unpacking and inspection, installing LOOSE-SHIPPED PARTS, selecting location, installing
Unit, preparing for operation, and operation.

UNPACKING AND INSPECTION

(see Figure 5)
NOTE: The Unit was thoroughly inspected before leaving the factory and the carrier has accepted and
signed for it. Any damage or irregularities should be noted at time of delivery (or not later than 15 days
from date of delivery) and immediately reported to the delivering carrier. Request a written inspection
report from Claims Inspector to substantiate any necessary claim. File claim with the delivering carrier,
not with IMI Cornelius Inc.
1. After Unit has been unpacked, remove shipping tape and other packing material.
2. Remove Unit sides, top and back panels as instructed.
3. Remove shipping bolts that secure Unit to skid, then remove skid.
4. Unpack LOOSE-SHIPPED PARTS. Make sure all items are present and in good condition.
Item
No.
Part No.
1
178025-100
Tapered Gasket, White
2
151689
Spanner Wrench, Flow Regulator
3
322859
Spanner Wrench, Dispensing Valve
4
325216
Cleaning Brush
5
311304
Tapered Gasket, Black
6
325982
Cup Rest
7
325983-039
Drip Tray
8
325986
Drip Tray Support
9
319941
Thread Cutting Screw, Hex Hd, No. 8-32 by 3/8-in. long
10
325666
Instructions, Scraper Blades
11
325458
Beater (item 13)
12
325457
Scraper Blade (item 2)
13
325984
Frame, Drip Tray
14
326002
Kit, Drip Tray Drain Hose (includes items 15-19)
15
170413
Drain Fitting
16
151281
Lockwasher, Internal Tooth
17
170423
Hex Nut, 5/8-32
18
140133
Drain Hose Clamp
19
113500-039
Drain Hose, 1/2-in. I.D. by 60-in. long
*Numbers in parentheses are in reference to items in Figure 3).

IDENTIFICATION OF LOOSE-SHIPPED PARTS

1. TAPERED GASKETS, WHITE (item 1) are used to seal connections when connecting Unit product inlet
lines to product tanks and connecting Unit CO

INSTALLATION

Table 3. Loose-Shipped Parts
Name
inlet line to CO
2
5
source.
2
Qty.
4
1
1
1
1
1
1
2
4
1
2
4
1
1
1
1
1
1
1
326142000

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fcb

Table of Contents