Tilt System Specific Protection Elements; Washer Location - GIRBAU HS-6085 Installation Instructions Manual

TILT system specific protection elements

Fixed guards: Covers at the machine sides. Protect the user from the contact with dangerous points and

spattering.
Moving guards: Front and side covers that permit the washer tilting. Protect the user from the contact with

dangerous points and spattering.
Pneumatic actuator limit switches. Prevent the excessive expansion of actuators and the excessive tilting of

the washer.
Position detector microswitches. Control the position of the tilt system.

Pneumatic actuator pressure regulators. Limit the air pressure of pneumatic actuators. Adjustment value: 5

kg/cm 2 (71 PSI). DO NOT MODIFY NOR MANIPULATE THIS REGULATOR.

Washer location

To determine the washer location bear in mind the machine's tilting movements. Refer to movement values on
figure 4.2 (section 4.5)
TILT models
45
Cod. 511485
Rev. 10/0918