GIRBAU HS-6085 Installation Instructions Manual page 30

Arrangement of the hoses
The inlets are identified by the label posted at each inlet (Fig. 3.5).
The washer mixes hot and cold water according to the temperature programmed. The use of hot/cold water
allows the machine to gain time and effectiveness in its washing programs.
Inlet 1. Connect cold water.
Inlet 2.
Connect hot water.
Inlet 3. Connect cold or hot water according to the washer configuration.
HS-6040; HS-6057; EH090; EH133
TILT MODELS
The location of the water supply must allow that hoses accommodate the washer's movements during
loading and unloading operations. Refer to section 4.5.
Installation
HS-6085; HS-6110; EH190; EH255
30
Fig. 3.5
Cod. 511485
Rev. 10/0918