Data Transmission - Ebyte E180-DTU(Z20-ETH) User Manual

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

list", to see the MAC address and short address of the network access device.

By this method, several routers and terminal nodes can be added in a coordinator network.

matters need attention:

If the router or terminal node that has already been added to the network needs to switch to the network established by the

other coordinator, it needs to carry out the "exit the network" or "restore the factory" operation, and then set it up again

according to the process of 4.4.3. Similarly, if the router that has joined the network needs to be changed to a terminal node, or

the terminal node that has joined the network is changed to a router, the "exit the network" or "restore the factory" operation is

also required.

4.4.4 Data transmission

(1) Open the host computer software of the coordinator device and the network access device, and click "Read parameters" to

confirm that the current network status of the device is "connect", indicating that the device has been networked.

Co.,Ltd.

Technology Co., LTD

E180-DTU(Z20-ETH) User Manual

Table of Contents