Restore The Factory Settings; At Instruction Configuration - Ebyte E180-DTU(Z20-ETH) User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.
 Web page pop up the main interface, you can query and set the relevant parameters;
 Click Submit to save the configuration parameters;
 The progress bar indicates the configuration schedule, do not refresh the page again after the configuration is
completed (refresh the page and enter the configuration mode again, you can enter the communication mode by
restart the device or submit again).

3.8.2 Restore the factory Settings

Long press the R e load button of the device until all LED lights are on to release the button.

3.8.3 AT instruction configuration

Ethernet parameter AT instruction configuration: device related parameter query modification, can be completed through
AT instruction configuration. For specific AT instructions, please refer to the "NA11x & NB 114 & NS1 & NT1-AT instruction
Copyright ©2012–2023，Chengdu Ebyte Electronic Technology
Co.,Ltd.
Technology Co., LTD
E180-DTU(Z20-ETH) User Manual
47